BS. 3826 CLASS AB. 6477
Being a colourless solvent silicon based liquid, Perma Treat gives permanent water repellant effect to the walls, stones and brick work.
DIRECTIONS FOR USE
Perma Treat should be applied on the surface that is free from dust, oil grease or curing compound. Complete the painting work on the surface, if necessary, before using Perma Treat. The product is applied on a bone dry surface by brush or spray. But spraying can be result oriented, as it's a easy to use and economical too. Perma Treat should be flooded on to the surface so that a run down of 300 mm is obtained. The treated surface should not get moisture for 48 hours.
Whenever Perma Treat is applied on the surface by brush or spay, it penetrates deep into the pores of the surfaces and forms a thin water repellant barrier which does not affect the look of the surface.
1) Perma Treat is effective for vertical surfaces.
2) Surface coated by Perma Treat can not be painted over by cement or emulsion paints.
3) Perma Treat may cause staining on wood, glass and metal surfaces.
4) Perma Treat coated surfaces suppress stickiness of mortar or other decorative treatments.
For spraying Perma Treat, airless pesticide spray pumps are used.
Perma Treat gives a coverage between 8 to 10 m² per litre. But depending upon porosity of surfaces.
HEALTH AND SAFETY
Perma Treat should be used in an open and well ventilated atmosphere. Light masks, goggles and hand gloves are recommended during the use.
Perma Treat is available in 1, 20 and 200 litres metal drum.
Remains useful for one year from the date of manufacture.