Product Range

Polymer Liquid Tile Adhesive

We at Perma Constructions are offering premium quality Polymer Liquid Tile Adhesive for all sorts of fixing purposes. This product is a complex polymer based white liquid. This adhesive is needed to add to the bedding mortars that are used for fixing granite slabs, ceramic tiles on horizontal surfaces. This adhesive automatically increases the tensile strength and water-proofing properties in the mortars. However, it prevents weeping joints in the floors and peripheral. This product should be added to the neat cement to improve the properties of the mortar. This tile adhesive produces immense strength for joining tiles and remain hygienic and dust free.    


Specification : BS. 5980: 1980 Draft CEN: prEN12004 -1997

Primary Uses :

  • For fixing ceramic tiles on concrete or mosaic floors
  • For fixing granites labs on concrete floors
  • For fixing marble slabs on floors
  • For fixing skirting on the walls
  • For fixing glazed, ceramic tiles to walls & floor areas


Advantages :

 

  • Liquid Tile Adhesive waterproofs the tiled area
  • Improves adhesion and tensile strength of mortars
  • It is economical
  • Easy to use
  • Non-toxic


Directions For Use :

 

 

  • For fixing ceramic tiles, granites labs, marble Slabs to the concrete floors – dry mix 15 kgs of cement (use white cement for fixing marble) with 50 kgs of fines and add two litres of Perma Liquid Tile Adhesive and water to get the desired consistency. Lay the mortar on the floor and spread it evenly. Press the ceramic tiles, granite or marble to position.
    • Mix cement : 15 kgs
    • Fine sand : 50 kgs (1:2 by volume)
    • Perma LTA : 2 litres
    • Water : 2 to 3 litres
    This mortar is sufficient to fix 37sq.ft of tiles with a 5mm thick bed.
  • For fixing ceramic tiles, granite or marble on existing mosaic floor – Dry mix 15kgs cement (use white cement for fixing marble) with 25kgs of fines and passing 300 micron sieve or use quartz or silica powder. Add two litres of Perma Liquid Tile Adhesive and water to desired consistency. Prime the back of the tile and the mosaic floor just before laying of the mortar with Perma Liquid Tile Adhesive mixed with neat cement (grey or white) mixed in the proportion of 1:1 by volume. Lay the smooth consistency mortar on the primed mosaic floor and spread it evenly. Press the primed tile or slab to position. Please note that the brush applied primer has a tendency to dry quickly. Hence prime the tile, granite or marble just before fixing.


Tile & Floor Primer :

 

  • Cement : 1kg
  • PermaLTA : 1litre

This covers about 20 to 30 square feet

Mix :

 

  • Cement : 15kgs
  • Quartz/Silica powder or : 1:1 by volume
  • Very fine sand : 25kgs
  • Perma LTA : 2 litres
  • Water : 2 to 3 litres

This mortar is sufficient to fix 42 sq.ft. of tiles on existing mosaic with a 3mm thick bed.

Properties :

 

  • Form : Liquid
  • Color : Milky white
  • Specific Gravity : 1.15 at 20oC
  • Chemical nature : Anionic
  • PH : 8-9
  • Solubility : Mixes freely with water
  • Application temperature : above5oC
  • Toxicity : Non-toxic to contact
  • Particle size : 1micron
  • Anti-oxidant : yes
  • Bacteriocide :yes
  • Antifoam yes


Packing : Perma Liquid Tile Adhesive is available in 2 Litres, 5Litres and 20litres packing.